DESCRIPTION:
EMEC RESIN is a formulation of an organic gray-black powder
additive for fluid loss control of water base drilling fluids. The
product is specially engineered to provide excellent control of
high temperature-high pressure (HTHP) filtration in the presence
of various chemical contaminants.
APPLICATION:
EMEC RESIN is used to control fluid loss of water base
mud at high temperature. It can be used for fluid loss control in
dispersed, non dispersed, low-solids, inhibitive muds, and various
other types of water-base muds: EMEC RESIN filtration control agent
found to be used successfully in wells where the bottom hole temperature
approaches
450°F. It has also been observed that at high temperatures,
EMEC RESIN improves the flow properties of the mud as well as controlling
fluid loss rate.
TECHNICAL INFORMATION:
EMEC RESIN is recommended to be used as fluid loss additives
over a broad temperature range giving benefits in low-to-moderate
temperature applications as well as in high- temperature. The recommended
average dosage is 3-4 lb/bbl of mud. However, concentration might
be increased, depending upon mud type, drilling conditions, and
desired performance. EMEC RESIN should be mixed through the hopper
into the suction tank of the rig circulating system at a rate of
15 minutes per sack.
PACKAGING:
EMEC RESIN is packaged in 25 kg per multi wallpaper bag.
HAZARDS:
EMEC RESIN may be harmful, irritating if inhaled. A dust
mask should be worn while mixing.
|
