DESCRIPTION:
EMEC SPOT is an Organic Oil-Soluble product that provides
significant aid in freeing differentially stuck pipes when mixed
with diesel or crude oil.
APPLICATION:
EMEC SPOT is designed to disperse mud solids and water
into very fine particles. As this occurs, the fluid penetrates the
filter cake, which was built between the drill pipe and formation
and release the differential pressure stuck.
TECHNICAL INFORMATIONS:
The volume of soak solution required is the annular volume
of stuck pipe zone plus 50 percent for hole washout. Displace EMEC
SPOT pill to cover the stuck pipe zone and allow sufficient time
for the pill to perform, on the same time work on stuck pipe. If
weighted spotting fluid is required use EMEC SPOT with the following
freeing pipe calculations.
1- UNWEIGHTED PILL
Mix in clean mud pits EMEC SPOT @
3 Gal per each barrel of diesel or crude oil.
2- WEIGHTED PILL
Mix in clean mud pit EMEC SPOT (W)
with oil then add water and EMEC BAR in order.
Pill formulation for 100 bbls is shown
below:
Weight desire (ppg) 7.3
10 12
14 16
18
OIL (BBL) 65
58 54
49 51
44
EMEC SPOT (drum) 6
6 6
6 6
6
WATER (BBL) 28
26 22
21 11
10
EMEC BAR 50 KG 127
227 318 422
517
PACKAGING:
EMEC SPOT is supplied in 55 Gal/drum.
HAZARDS:
Avoid contact with eye and skin.
|
